Drilling mud Equipment

GN Solids Control is focusing on the full package of drilling mud processing system. As GN Solids Control makes full line drilling mud processing equipment. They know well about the equipment. GN Solids Control can offer professional proposal of drilling mud treatment system and mud mixing unit. All processing equipment and the tank volume should be match to each other.

For example, if the total shale capacity is max. 160m3/4 or 200m3/h, but the desilter and desilter capacity is 240m3/h. And feeding centrifugal pump and mixing pump are 55kw or above. The system is not reasonable. As the 1rst stage separation equipment, the shale shaker capacity should be bigger than the next step separation equipment. Otherwise, if the mud flow is big, the shale shaker will overflow. Or if the mud flow is small for the shale shaker to handle, but the desander and desilter pump are too big, it will cause pump suction air. And the hydrocyclone separation performance is not good in condition the feed flow is too small. The client need to increase shale shaker capacity, or decrease pump and mud cleaner capacity to suit for the mud pump capacity.

Every jobsite is different. Every client has his preferable. In order to offer a suitable mud system design to suit for the job site situation, as well as client’s special requirements. Below are some questions to let GN Solids Control knows more about clients request.

1) what is the rig horse power of the system for, or what is the mud pump horse power or capacity? The whole mud system handle capacity should suit to the mud pump capacity.
2) What is the total tank volume the client prefer?
3) How many tanks the client prefer?
4) What is the max. Tank size (L × W × H) the client can accept to suit for their local shipping regulations?
5) What processing equipment they prefer to equip inside the system? Shale shaker, mud cleaner, desilter, desilter, mud cleaner, vacuum degasser, decanter centrifuge, etc..Which processing equipment they want?
6) What is the Voltage and hz for the mud system?
7) What is the explosion proof standard, CNEX, ATEX, or international IECEx standard?
8) Additional requirement and any special requirements if there, like do they want trip tank, pill tank, water tank, etc…

GN Solids Control makes various sizes and types of decanter centrifuge for various applications. GN Solids Control various types of decanter centrifuge is designed for the drilling mud solids control and oilfield waste management. GN Solids Control VFD drive decanter centrifuge with variable speed allows drilling contractor or mud service companies to do the barite recovery, fine fine and ultra fine solids separation, dewatering centrifuge.

GN Solids Control makes the decanter centrifuge from 9 inch bowl to 22 inch bowl available for different applications. GN Solids Control decanter centrifuge bowl length and diameter ration is over 3, this gives the best result for the drilling fluids cleaning.

The smallest decanter centrifuge made by GN Solids Control is 9 inch. GN Solids Control makes 2 sizes of 9 inch bowl mini centrifuge. Besides GNLW224EP-VFD decanter centrifuge, GN Solids Control has another fixed speed decanter centrifuge with a shorter bowl length. The model type is GNLW223D.

The decanter centrifuge mostly supplied for the dewatering treatment process is GNLW224EP-VFD. The bowl of the centrifuge is 9 inch (220mm). As the compact design, GN Solids Control 9 inch decanter centrifuge is popular for client to use it in small capacity or limited space application for solids and liquid separation.

GN Solids Control 9 inch decanter centrifuge is also considered to be the ideal choice for experiment testing with decanter centrifuge. GN Solids Control 9 inch decanter centrifuge is optional in three types includes: fixed gear box drive, fully hydraulic drive, and variable frequency drive. GN Solids Control 9 inch decanter centrifuge is widely used for Industry Waste Water Treatment and for Diamond Core Drilling Fluids Treatment.

The centrifuge type is with 220mm diameter x 924 mm long Duplex Bowl. The duplex scroll with hardfacing and unique feed zone. Clients can also choose tungsten carbon tiles for more durable and for longer service time. The GNLW224EP-VFD decanter centrifuge is designed for 5000 RPM maximum speed, resulting in 3077 G force. While working with the VFD control panel, the type speed is ranging from 0 to 4500 RPM, and to generate maximum 2492 G force. All wetted area of GN decanter centrifuges are either Duplex or SS materials, all wear area’s are protected with replaceable Tungsten inserts.

GN Solids Control is one of the well-known International Brand for drilling Mud Solids Control System & Drilling Waste Management system. GN Solids Control offers the one stop solution for Solids Control treatment of oil gas drilling, CBM drilling, HDD, and water well drilling as well as the construction drilling mud treatment etc.

Nearly all drilling mud processing equipment containers shaker screen separation. Replacement shaker screen is a major wearing spare parts for drilling mud system. And it is a big and continue cost. GN Solids Control is specialized in high quality replacement shaker screen for various popular shaker models. GN Solids Control has his own R&D department for shale shaker screens. Clients can also contact GN Solids Control to make customized shaker screen.

Most solids control equipment manufacturer only make some kinds of processing equipment. Like some companies make shale shaker, mud cleaner and agitators, but they are not capacity to make decanter centrifuge or cuttings dryers. Some companies are only capacity to make centrifuges for various industries, they cannot make solids control separation equipment, like shale shaker, mud cleaner, degasser, etc…While some companies are only make pumps, they cannot make separation equipment. And there are some companies only make mud tanks, they are not capacity to make solids control separation equipment by themselves.

GN Solids Control is focusing on full line solids control equipment for various drilling mud. GN Solids Control is specialized in drilling mud liquid and solids separation. All the separation equipment are made by GN Solids Control. In this case, GN Solids Control knows more about the separation equipment, and can offer more reasonable proposal.

Furthermore, electrical control system is another essential point for separation equipment, especially VFD smart control panels for decanter centrifuges. GN Solids Control has his own electrical control department. GN Solids Control electrical engineering business department has comprehensive ability to provide solution for explosion-proof electrical control. GN is able to provide the electric control system, explosion-proof electrical enclosure design and development, fabrication, site installation, program debugging, and other services.

GN Explosion Proof Certification: GN Solids Control electrical control products have been certified by China National standard CNEx, International standard IECEx and European standard ATEX certificate, which enable GN’s products to meet high level market requirements.

Recently 2 sets of drilling waste management equipment are ready for shipment. They are customized for an Africa project. The drilling waste management equipment will be used to treat oil base mud and oil base drilling cuttings which generated from oil and gas drilling field. All equipment inside the waste management system are customized with client appointed color.

The 2 sets of drilling waste management equipment including following items:
1) Vertical cuttings dryer. Quantity: 2 sets. Model: GNCD930.
Vertical cuttings dryer is also called as vertical centrifuge. It is the major processing equipment to treat oil base mud and oil base cuttings. Vertical cuttings dryer can separate oil on the cuttings to 3% ~ 5%. Before vertical cuttings dryer treatment, the oil on the cuttings is around 10% ~ 20%. It means the vertical cuttings can recover more usable drilling mud with oil, which is valuable. More recovered oil means save more cost for clients. And further more, more recovered fluids means less wastes generated from the process. It can also save the cost of hazardous material shipment.

2) High speed decanter centrifuge. Quantity: 2 sets. Model: GNLW363C-VFD
GNLW363C-VFD is a 14inch high speed decanter centrifuge. It is the most popular size decanter centrifuge used for drilling mud solids control system and drilling waste management system. The typical speed of GNLW363 is 3200RPM. In some projects, clients want high speed decanter centrifuge over 3200RPM, GN Solids Control can also offer. The max. Typical speed of GNLW363 can up to 3600RPM. GN Solids Control can offer fixed speed control for 14inch decanter centrifuge for easy operation. GN Solids Control can also offer VFD control and FHD control for the 14 inch decanter centrifuge.

3) Screw conveyor. 4 sets. Each vertical cuttings dryer will use 2 screw conveyors. One screw conveyor is used to feed cuttings to vertical cuttings dryer. Another screw conveyor is used to transfer the discharged solids from vertical cuttings dryer.

Oil sludge treatment, oil base mud and drill cuttings treatment is the major product made by GN Solids Control. Some clients do not know the difference of Oil sludge treatment system and oil base cuttings treatment system. They want to know the difference and know how to choose the right separation equipment.

Normally for OBM cuttings treatment, clients will separate cuttings and recover usable drilling fluids, and sell the drilling fluids. It is 2-phase separation. While for oil sludge treatment, clients will separate oil, water and solids. They do 3-phase separation.

Below are some general information to let clients know more about the different and about the equipment choosing.

1) As 3-phase centrifuge can only allow slurry with max. 10% solids content and particle size less than 2mm, 2-phase decanter centrifuge is must to be used before 3-phase separation to reduce the mud weight and solids percentage. After 2-phase centrifuge separation, the oil, water and soil mixture slurry flow into 3-phase decanter centrifuge to get oil, water and soil.

2) In order to remove as more ultra fine solids as possible, chemical dosing unit will be used together with decanter centrifuges for dewantering flocculation treatment. We quote you the 3-tank antomatic chemical dosing unit. It is used for powder chemicals. If you will use liquid chemical, pls tell me to revise the quotation.

3) Per our communication on Whatsapp. The pre-separation equipment for OBM cuttings and oil sludge is different. For pure OBM cuttings from shale shaker and mud cleaner, Vertical cuttings dryer is better. It can reduce the oil on the cuttings to 3% ~ 5%. It can remove more usable liquid. And the solids discharge is very dry.

But vertical cuttings dryer cannot be used to treat the soil sludge discharged from centrifuge. As its screen basket opening is 0.5mm, 0.35mm and min. 0.25mm. The soil cake from centrifuge is very fine and will all pass the screen opening.

4) Oil sludge is normally the mixture from different application, like drilling mud, drilling cuttings, soil cake from centrifuge separation, tank bottom slurry, slope oil, refinery waste oil slurry, industry waste oil, etc… The solids size and solids content is more complex. In this case, high G drying shaker is used for pre-seperation. And as the oil slurry is more complex, sometime, need to dilute and heating the sludge before separation. The solids waste discharge from High G drying shaker is with higher oil on the cuttings after separation. For example, before treatment the sludge with 15~20% oil content. After high G drying shaker, maybe around 10~15%, or even higher if the sludge with high viscosity and density.

GN Solids Control has an oil sludge treatment system which is used at Qinghai Oilfield in China. The system is used since May 2018 till now. It is a customized oil sludge waste reduction system. Clients are happy with its performance.

Many clients are showed great interest on the system, below is some information of the system to let people know more.

1.The system is used since May 2018 till now, the location is Qinghai Oilfield in China.

2.The liquid content of the raw material oil sludge is 70% – 80%.

3.There is a pre-mixing and heating modular in the oil sludge separation system. Oil sludge will be heated up to 60C degree, during the heating process, chemicals will be enhanced into the process procedure to help for separation. The chemical enhancing is based on the material situation. If the material is easy for separation, heating and chemical dosing may be not needed. It depends on the separation result.

4.There is a double deck drying shale shaker in the customized system for pre-separation. After shale shaker, there is a desander separator.

5.After desander mud cleaner, it is decanter centrifuge separation by an 18inch big bowl centrifuge. There are 2 sets GNLW453C-VFD centrifuge for ultra fine solids separation.

6.There are 2 types of sludge vacuum pump for sludge and slurry transfer in the system: GNSP20B and GNSP40B.

7.The system for the client is 2-phase separation. After separation, clients get clean oil slurry with small percentage ultra fine soil. The oil slurry recovered from GN oil sludge system will be further treated by slurry separation system to get oil and water. The final solid waste is taken to third party the biodegradation and pyrolysis company for processing.

GN Solids Control can also offer 3 phase separation after the 2 phase centrifuge sepration to get clean oil, water and solids.

Big bowl decanter centrifuge is a major separation equipment for oil sludge treatment. GN Solids Control makes 2-phase decanter centrifuge for liquid and solids separation, and 3-phase decanter centrifuge for water, oil and solids separation. The centrifuge bowl sizes are vary from mini size 9 inch to big bowl 22 inch size and the largest big bowl 30 inch.

Last week, some sets of GNLW554ET- VFD decanter centrifuge were shipped to an clients doing oil sludge treatment. GN Solids Control makes T Series Decanter Centrifuge mainly for dewatering treatment and for thickness.

GN T series decanter centrifuge for dewatering / Thickening is with beach angle of 8.5 degree. It is widely used for maximum dewatering requirements of municipal and industrial waste water sludge. The dewatering decanter centrifuge is designed for easy separation material include large particle size, high density difference of solid and liquid, low viscosity, high concentration, high treatment capacity and higher dryness than clarity. The materials like sludge or wastewater containing fine particles usually need to be added with flocculants to gather the fine particles condensed into large ones, and then dewatered with T series decanter centrifuge.

Applicable Material of GN Solids Control T Series Decanter Centrifuge can be used to treat below materials, but not only limited to them: Drilling mud, environmental protection sewage, oily sludge, cutting fluid, sand washing water, mineral washing water, soda white mud, salt mud dewatering, magnesium aluminum emulsion, steel-making waste water, precision casting waste water, construction mud, tunnel mud, mine waste water, industrial waste water, organic waste water, aquaculture waste water, chemical industrial waste water, printing and dyeing waste water, municipal sewage, river sludge, water plant sludge, lake sludge, kaolin grading, calcium carbonate, bentonite, Silica, titanium dioxide, calcium sulfate, barium sulfate, conductive film glass polishing solution, aluminum hydroxide, cryolite, silicate, oil sand separation, landing oil, oil sludge, coal tar, inorganic fertilizer, Chinese medicine extraction such as taxus chinensis, honeysuckle and liquorice, clarification, concentration and dehydration of salt crystals, etc

The most popular bowl size used for oil sludge separation is 9 inch, 14 inch and 22 inch decanter centrifuge. For the 3 bowl sizes, GN Solids Control has 2 model series to suit for different material situation. The 2 model series are defined per the ratio of bowl length and bowl diameter. GNLW223, GNLW224, GNLW363, GNLW364, GNLW553, GNLW554.

Regarding the 3 bowl diameter 9 inch, 14 inch and 22 inch decanter centrifuge, the ratio of bowl length and bowl diameter can be 3 or 4. The ratio 3 serials decanter centrifuge can be used for oil and gas drilling fluids treatment. The ratio 4 decanter centrifuge is specially designed for oil sludge treatment and waste water, waste oil treatment.

GN Solids Control makes full line drilling mud solids control equipment and drilling waste management equipment. GN Solids Control is also capacity to make high quality replacement shaker screens. Besides makes replacement shaker screens for GN Solids Control own brand shale shaker and mud cleaner. GN Solids Control is also a famous screen manufacturer for various models and brands shale shaker.

GN Solids Control makes high quality composite frame pretension screen. The screen internal is supported with metal frame for reinforce. The screen external are covered by special material plastic which contains fiber glass for durable at high temperature. The external plastic is made from hot press by hot press machine. Compared with traditional metal frame, it is more environment friendly during manufacturing. And the quality is much more stable and under control. As the traditional metal frame frame cover plastic by dipping, which causes more pollution. And more man power involved during manufacturing. The quality is not stable at automatic machine production line.

Some clients may think composite frame shaker screen is an excellent screen on quality and performance, but they are not environmental friendly and a high carbon foot print for decades to come. They prefer the company to make the decision to revert back to metal frame screens to as a commitment to the environment and to reduce carbon foot print . They think Metal frame screen platform can be recycled for other manufacturing applications.

It is good question. When people talk about plastic, it may mean pollution. But this plastic which GN Solids Control use to make screens is PP (polypropylene). It is (C3H6)n only have C and H to produce CO2 and H2O if burning. This PP (polypropylene) plastic is relatively less environmental impact. And In many countries like in China, there are some companies who can do the recycling of the composite frames made by PP (polypropylene) and metal.

GN oil sludge separation system is a kind of reducing processing to reduce the waste volume, and to prove processing efficiency of next stage separation equipment, like thermal desorption unit.

Many clients are interested in GN Solids Control Oil Sludge treatment machine. They check video from GN website or from You Tube showing how does GN oil sludge separation system work. They will contact GN Solids Control if have questions. Below are some questions the clients normally ask.

1) We have both sludge and grease, does GN Solids Control Oil Sludge treatment machine work with both?
2) How much is the productive energy?
3) How much is the the viscosity and density of the recovered oil?
4) Does GN Solids Control Oil Sludge treatment machine treat solid sludge and grease mixed with sand?
5) what kind of oil does GN Solids Control Oil Sludge treatment machine produce? Is it fuel, diesel…? If we can have more details about the produced oil properties, like the density, and the viscosity.

The normal capacity of GN Solids Control Oil Sludge treatment machine is 1 m3/h, 5 m/3 and 15m3/h. Although the normally has shale shaker separator in the system, the handling capacity is defined by decanter centrifuge not shale shaker. As decanter centrifuge has the min. treating capacity in the system.

GN Solids Control has many equipment and oil sludge separation system in environment protection companies, waste management company, mud service company, and other companies who handle waste materials. GN Solids Control also has many separation equipment, especially decanter centrifuges used at refineries to help them separate ultra fine solids from waste oil. But the treatment technology of GN Solids Control is only physical separation. Sometimes, heating and chemical enhancing will be used to help for achieving a better separation performance.

GN oil sludge separation system is to separate liquids and solids. The final productions from GN oil sludge separation system are water, oil and solids. But it will not change the oil parameters.

GN Solids Control waste management decanter centrifuge is specially designed for drilling cuttings and various waste material. It is widely used after high G drying shaker, Vertical cuttings dryer for drilling cuttings treatment. Or used together with chemical dosing system for dewatering treatment.
Compare with normal decanter centrifuge in China or from U.S, Europe, GN Solids Control decanter centrifuges have below advantages.

GN decanter centrifuge is made per international high standard specially designed for drill cuttings and waste management. Below are some necessary features. It is much more durable than economic standard. :

GN decanter centrifuge Bowl material is Duplex Stainless Steel 2304 and by centrifugal casting; While other Chinese brand or even U.S brand are normal SS304 or SS316 made by casting. GN material grade and processing technology are both better. It ensures a better dynamic balancing during high speed operation. So GN waste decanter centrifuge has less vibration compared with other brand centrifuges at the same working situation.

GN decanter centrifuge Screw Protection is Tungsten Carbide Tiles. It can last for longer life and is easier for replacement;

GN decanter centrifuge Solids Discharge is 360° type with wear protection with 6 fully covered tungsten carbide discharge wear liners. And it is interchangeable.

GN decanter centrifuge Liquid Discharge port is protected by adjustable Weir Plates. Operators can adjust the wetness per material situation.

All Bearings used in GN decanter centrifuges are from international top brand: Original SKF or FAG.

GN Solids Control special designed mobile skid is heavy duty telescopic skid with operation height 2800m, or 4100 per clients request. Both the feeding screw pump and VFD control panel can be mounted on the skid for easy movement. There are foldable walkways and guardrails make the skid easy for movement and easy for job site layout. And it is safe and convenience for operator to go up and down to check and centrifuge operation. Clients likes GN design much.