GN Solids Control makes different sizes mud recycling and mud mixing system for HDD rigs, water well drilling rigs, etc… The popular size includes but not limited to 150GPM, 200GPM, 350GPM, 500GPM, 600GPM, 750GPM, 1000GPM, etc…

GN Solids Control makes different sizes and customized design mud recycling and mud mixing system to suit for clients request.

For example, a client contact GN to inquire a customized water well drilling mud cycling system for 500GPM ~ 1000GPM. The client want a customized mud recycling system equipped with 2 shale shakers, 2 desander mud cleaners, 1 desilter mud cleaner, 1 middle speed decanter centrifuge and the system should be complied with a mixing hopper and mixing pump unit.

The client wants both shale shakers and both desander mud cleaners should have the possibilty to use only one of them if client drill smaller borehole and uses smaller mud pump. GN Solids Control will equip valves at shale shaker distribution pipelines and desander inlet pipes to control the feeding. Clients can choose to use both or either.

2 shale shakers, 2 desanders, 1 desilter and centrifuge feed pump are located on #1 tank.
#1 mud tank will be divided into 3 compartments:
1.1 Both shale shakers feed the first tank.
1.2 Both desander mud cleaners feed the second tank.
1.3 Desilter mud cleaner will feed third tank. It is clean mud tank, Centrifuge feed pump sucks from desilter tank.

Decanter centrifuge, mixing hopper and mixing pump are located on the #2 mud tank.
#2 mud tank (for clean mud) will be divided in to 3 compartments:
2.1 decanter centrifuge tank, which suck mud from 1.3 desilter tank and feed the tank under it.
2.2 clean mud storage tank
2.3 mixing tank with hopper and mixing pump

Mud Agitators and feeding and transfer pumps will be located per needed and per payout.
Third pass to forth via liquid level height.


ABOUT THE AUTHOR

admin