Drilling mud Equipment

GN supply mud system for XJ350 Workover Drilling Rig,and also can recommend reliable China workover rig manufacturer for clients full package solution.

XJ350 Workover RigXJ350 workover rig is mainly used for shallow well workover, oil testing, fishing and pump check

operations. It is equipped with a lifting system and a rotary operating system. It can be used for workover, lateral drilling and water well drilling operation if equipped with a rotary table and relevant parts.

Features XJ350 Workover Rig

◆ 102.69 ft ( 31.3m ) double section mast, hydraulically raised and telescoped.
◆ 8×8 full drive chassis for XJ350 single-drum rig.
◆ 10×8 chassis for XJ350S double-drum rig.
◆ Simple operation platform hanged on the rear is available.
◆ A rod hanger is available Continue reading “XJ350 Workover Rig”

Well servicing rig is also called workover drilling rig,GN Solids Control design and supply well service drilling rig mud system clients all around the world.

Well servicing  RIGS: Land-based workover rigs (commonly referred to as well servicing rigs) consist of a mobile carrier, engine,

drawworks and a mast. The primary function of a workover(Servicing) rig is to act as a hoist so that pipe, sucker rods and down-hole equipment can be run into and out of a well. Land-based workover(Servicing) rigs are easier to move between well sites and different geographical areas of operations than drilling rigs. Typically, the rigs are self-propelled and have less auxillary equipment to move. Because of size and cost considerations, workover(Servicing) rigs are used for these operations rather than the larger drilling rigs.

Well servicing drilling mud systems:

• Repeat order for workover rig solids control equipment from Kuwait company

• 2 mud tank systems for workover(Servicing) drilling rig to Indonesia

GN shipped nearly 10 orders solids control equipment From September,2010 to October,2010.And most of the shipment are from GN international sales department.In 2010,GN Solids Control has broken into another new countries or areas.

Following list of recently sales of drilling mud equipments:

• GNZJ63-3 Mud Cleaner for petroleum drilling solids control to Indonesia

Do you know there comes up a new player for Drilling mud cleaning system in Australia,not from American,but from “China”.

GN Solids Control win Australia Clients mud treatment equipment Orders by:
* Good Quality
* Customized Solutions
* Fast & Reliable Services
* Competitive Price
GN has broken into Australia Market,more then 5 clients in this year has ordered from GN,2 clients has ordered complete 500GPM

mud treatment system from us after their visit.
We also have more potential client are going to order mud cleaning sytem soon.Why you wait?

Pictures show GN200 GPM mud treatment system FYI.If there is anything I can help for the mud recycling equipments,pls feel free to let me know.

Below is an inquiry for mud treatment equipment from Australia client:
Below is an e-mail I sent to a supplier in Australia but after checking you web site and the equipment is required in Mongolia it may be more economical to deal with a supplier in China.

Project – 18 x 400m x 444m water production wells.
Mud Pumping Rate – App 800 Gal/ min
Continue reading “Drilling Mud Treatment System for sale”

As a Shale Shaker manufacturer,GN has many Oli Vibrator Motor in stock for sale.The vibrating motor is MVE-series Electric External vibrator motors.

Contact to get quote for price for Oli MVE-Type Electric External Vibrator motor:GN Solids Control.

The MVE-series Electric External Vibrator motor Range has been successfully used by the construction industry, the mining ,oilfield industry where the shale shaker,and shaking unit are used.as well as by other industrial sectors worldwide for many years. Rotary Motor vibrators by OLI afford a guarantee of long term durability, reflecting the care taken over selection of components and the

high level of precision adopted in manufacture, whilst maintenance is simple in the extreme.

Oli Vibrator Motor Specs:

Voltage: 220/380V three-phase, can be customized
Frequency: 50Hz/60Hz, can be customized
Insulation Class: H-level subject, wiring chamber Class F
Protection class: dustproof and waterproof (IP65)
Working environment: Altitude does not exceed 1000m, -20 ~ +40 ℃
Duty: Continuous (S1)
Exciting force adjustment: 0 ~ rated exciting force, can achieve the stepless adjustment
Exciting force: 0 ~ 3500 kg
Certification: ExdⅡBT4

Vibrating Strength for the motor is adjustable.

The Oli Vibrator motor are used in GN Shale shakers,mud cleaners,desander and desilter with different power.

Mud rotary drilling solids control unit is usually very small,it’s better to be a compact design.For mud rotary drilling mud cleaning,GN Solids control have 100GPM,200GPM,300GPM mud recycling system available.

Following is the confirguration of GN200 GPM Mud rotary drilling  solids control unit.

• GNZS83-2 Shale Shaker with 1.8㎡ screen areaa

  

• ZQJ100S Desilter with four 4 inch cones.
• 11kw 3×4 centrifugal pump for feeding desilter.
• Mud tank 7000L x 2300W x 1550H
• Jet mud mixing unit with 11kw 3×4 pump and hoppers
• Submersilble slurry pump

Solids Control Unit processing

1. Slurry pump feeding mud to the shale shaker from the mud pit for first phase solids removal
2. Then desilter pump suck mud from first compartment and feed to desilter. Continue reading “Mud rotary drilling solids control unit”

The geothermal drilling mud system is similar to oil gas drilling solids control system.They are both  vertical drilling,and need the drilling mud cleaning equipment to be explosion proof.Some geothermal drillers use AIR drilling for  Geo Thermal  but  tehy will have to use drilling mud when we encounter water and the air won’t lift  the water anymore.Then drillers will have requirement for mud recycling and solids control.As a professional manufacturer for solids control,GN supply complete equipment for geothermal drilling mud system,but also gives our clients turnkey solution with Skid mounted mud system,or Trailer mounted mud tank system.

Features of geothermal drilling mud system.

The drilling depth of geothermal well drilling is not as deep as the oil gas drilling,so the treati

ng capacity is not as big as oil gas deep well drilling.But clients usually require the solids control equipment to separate out the fine p articles.This is similar to workover drilling mud solids control system.GN Solids Control  have provide equipments for China geothermal well drilling clients,and also supplied mud equipments to many other countries around the world.Presently,we are discussing with many geothermal drilling companies from western Australia for mud system.Following is an example layout of of geothermal drilling mud system.

• Two linear motion shale shakers.
• One vacuum degasser.
• One middle speed decanter centrifuge.
• One mixing pump and mixing hoppers.
• Two 7.5Hp mud Agitator
• Two mud gun. Continue reading “Geothermal drilling mud system”

As a mud tank system China leading manufacturer,GN Solids Control also provide flow line divider for petroleum drilling,and horizontal  directional drilling(HDD).Flow line divider is also called flow line distributor.

Function of flow line divider:

Solids removal efficiencies are dramatically increased by the Flow line Divider, which distributes fluids/solids equally

to multiple downstream shale shakers. Positive sealing weir gates are removable, allowing flow per selected shale shaker or installed omitting flow. The Flow line Divider/Distributor eliminates the need for back tanks and shaker bypasses and minimizes the effect of pitch and heave.

How the Flow line Divider Works

Mud from the flow line enters the rear of the Flow line Divider (1) where it contacts a baffle (2) allowing the flow to pass under and sometimes over before it flows over the weirs (3), and divides the liquid and solids equally between the desired number of shale shaker feed ports (4). Positive-sealing weir gates permit flow to the downstream shale shakers

Not only we design and manufacture flow line distributor for GN shale shaker,but also we can design and make flow lline divider for international top brand shale shaker like Derrick,NOV Brandt,MI-Swaco.

Skid mounted single mud tank system for bentonite mud mixing and recycling are popular for horizontal directional drilling(HDD),water well drilling,geothermal  well drilling,and small workover petroleum well drilling rig.

Following we give an example of GN 400 GPM Skid mounted bentonite mud mixing/recycling system made by GN Solids Control in China.

400 GPM Mud Tank System

• One Mud Recycling Tank with dimension:8000Lx2300Wx2100H
• Desander unit with 3 Panel shale shaker mounted by 2×8 inch desander cones
• Desilter unit with 4×6 desilter cones.
• Two 5×6 30Kw centrifugal pump for feeding the hydrocyclone cones
• One 5×6 30 Kw centrifugal pump for mud mixing
• Mud mixing hopper mounted on the tank top side.
• Two mud gun for mud agitation within tank.
• Normal treating capacity for 400GPM with separation cut point:20 Microns
• Submersible slurry pump for feeding shale shaker from mud pit

Continue reading “Skid mounted bentonite mud mixing/recycling system”

ZJ50 drilling rig is a Chinese model oil drilling rig,GN Solids Control manufacture ZJ50 (1500HP) drilling rig mud solids control system with standard solids control equipments,but also customized mud tanks layout for your drilling application.

To buy ZJ50 (1500HP) drilling rig mud solids control system from GN,the solids control equipment manufacturer

directly,you’ll save at least 20% cost/price for the total mud system package,we also provide services for training up clients engineer for commissioning and operating of the the ZJ50 (1500HP) mud system.

In China, for the ZJ50 there are different models as below:

·  ZJ50/3150L Drilling Rigs (1500 HP)
·  ZJ50/3150D E-Drive Drilling Rigs

The ZJ50 drilling rig mud system usually have the following main solids control equipments.

1)2 Sets GNZS83-3 Shale Shaker

2)1 Sets GNZJ83-3 Mud Cleaner with 12inch 2 desander cones,and 4 inch 16 desilter cones. Continue reading “ZJ50 (1500HP) drilling rig mud solids control system”