This week, a batch of drilling waste management equipment is under running test before delivery. It is a full package of drilling waste management system for oil and gas drilling field. After proved qualified by the running test, the drilling waste management system will be packed and shipped to Russia client by international railway shipment. The drilling waste processing equipment for the Russia client will be used for treat oil based mud and oil based cuttings in their rig site.
Below is the major processing equipment included in the containerized drilling waste management systems:
1) Vertical cuttings dryer
Vertical cuttings dryer are the major processing equipment for oil based mud and oil based mud cuttings. It is an effective machine to recovery more valuable drilling mud. After VG dryer, the oil on the cuttings can be lower down to 3% ~ 5%.
2) High speed decanter centrifuge
It is 14 inch high speed decanter centrifuge in the cuttings drying system to using together with vertical cuttings dryer. As the drilling mud recovered from vertical cuttings dryer is too heavy to reuse. High speed decanter centrifuge will be used after it to remove ultrafine solids and reduce the mud weight.
3) Containerized dewater unit for chemical dosing
It is a 3-tank automatic chemical dosing system in the waste management system to help the centrifuge to remove ultrafine solids smaller than 2 microns. As the high speed decanter centrifuge is gravity separation equipment. It can only remove 90% solids above 2 micron. For the centrifuge itself it cannot remove ultrafine solids smaller than 2 microns.
All feeding pumps, connection pipelines, and control system inside the system for included for a turnkey solution.
Besides the mentioned drilling waste management equipment, GN Solids Control also make others waste management equipment, like screw conveyor, solids vacuum transfer pump, drill cuttings solidification unit, big bowl centrifuge 18inch, 22inch and 30inch, automatic tank cleaning system, oily sludge treatment system, etc…