A package of solids control equipment is ready for shipment. They are made for a waste management project for a Canada client. A shale shaker, a 1000GPM 3-1 mud cleaner and a high speed decanter centrifuge. They are basic separation equipment for oil and gas drilling mud treatment system.

Shale shaker model is GNZS594. It is a 4-panel linear motion shale shaker with compositeframe pretension screens. There are 2 vibration motors are equipment for the shale shaker. The motor brand are international top brand Italy OLI or US Martin Brand. The EX control panel are made by GN Solids Control with with SIEMENS or Schneider Component. The screens are fixed with wedges and with Gear unit for fast screen change and longer screen life. The Mechanical Deck angle adjustable system is GN patent design. It can adjust shaker deck while the shale shaker is working. And the user only need to adjust shaker deck at one side, both shaker deck angle will be changed levelly.

 

Mud cleaner is a desander & desilter & Shale Shaker 3 in 1 unit for compact footprint combo type shale shaker separator. Its capacity is 1000GPM. The combo type shale shaker is equipment with no. 2 × 10inch desander cone and no. 12 × 10 inch desilter cone. The hydro cyclones are made by Polyurethane Material for long life time. And the hydro cyclone assembly is removable for adjusting to be a shale shaker. The under flow shale shaker model is the same with first stage solids control shale shaker GNZS594.

 

The high speed decanter centrifuge is 14inch bowl size. The separation speed can up to 3200rpm. GN Solids Control can offer fixed speed control, VFD control and FHD control for the 14inch decanter centrifuge. It is located on a telescopic skid. The skid can fall down to less than 2.5m for international container shipment. And it can lift to 2.8m ~ 4.2m per clients request during working.

ABOUT THE AUTHOR

admin