NEWS
Welcome to GN Booth at ADIPEC 7-10 November, 2016
ADIPEC, Abu Dhabi International Petroleum Exhibition Conference is one of the largest shows for oil and gas industry. GN Solids Control have been continuously attended this show for x years, and this year, GN will again show there. All visitors are welcomed to have a stop at GN booth to learn more about GN’s equipment and new development.
How to find GN at ADIPECShow Time:7-10 November, 2016Booth No.: Hall 10, 10436
For appointment, the visitors could also send emails to sales@gnsolidscontrol.com to get brochures of the equipment you may interest.
What the visitors can find at GN boothThe decanter centrifuge is one of GN's most important products. For the oilfield application, GN could provide the decanter centrifuge sizes of 14 inch, 18 inch and 22 inch. Among them, the 14 inch bowl which the typical model GNLW363 will be shown at ADIPEC this year. It is the best seller in GN’s centrifuge production line as it has a very wide application like middle speed in normal solids control system for barite recovery, high speed model drilling waste cuttings system for fluids recovery. This year, GN also launched decanter centrifuge used for other industries. Like big bowl model 30 inch for waste water treatment and 3 Phase centrifuge for oil, waster and solid separation.
GN Solids Control is approved to be the member of IADC
IADC is short of International Association of Drilling Contractors which is the only one worldwide organization of drilling industry. During the 65 years of developing history, IADC was committing to improving safety, advancing drilling technology, striving for reasonable regulation and legislation, and enhancing the training and education of technical and management personnel.GN Solids Control, as the first one API certified China base manufacturer of drilling mud recycling equipment, since the very beginning of foundation, has been focused his target on providing the qualified products for the drilling contractors from every corner of the world. GN claimed like that, actually, GN indeed did it.
GN Decanter Centrifuge with polymer dosing unit for Waste Water Treatment
GN Solids Control have a wide range of decanter centrifuges from 9inch to 30inch, the bowl length and diameter ration is up to 4.2 for differential applications. This project which is ready for shipment is a big bowl 22inch decanter centrifuge with polymer dosing unit in a 20 foot container for industrial waste water treatment.
Waste Water CentrifugeThis waste water treatment project, clients ordered the 22inch decanter centrifuge, screw pump for feeding centrifuge, and a 20 foot polymer dosing system. The GNLW553C-VFD centrifuge is a 22inch bowl centrifuge with 71 inch bowl length. The bowl peed is up to 2800 RPM with VFD and HMI control panels. The chemical enhanced technology is able to provide the waste water solutions with zero cut point separation to discharge clean water.
120 m3 Trenchless Mud Mixing System Waiting for Delivery
Trenchless is also called No Dig which is a kind of technology to lay the pipe line of gas or petroleum underground or repairing the existing broken pipes without digging the surface ground. Before laying the pipes, the contractor need do some drilling job which is always named horizontal directional drilling as this type project is often cross the river, road, mountain, remote area horizontally underground from one side to the other by using the HDD drilling rig. As we know, the HDD rig will need the mud mixing system to make the drilling fluids during drilling process.
Mud Mixing SystemThe ordered mud mixing system is already finished the fabrication and waiting for delivery. A self-contained mud cleaning system is consisting of mud recycling and mud mixing. For this client, GN ever provided a complete mud system which has all the equipment including mud mixing system installed on one mud tank. For longer drilling distance, a larger volume of mud tank is needed to store sufficient drilling mud. On consideration of this, client ordered a larger single mud mixing system from GN. GN is also glad to supply this to the client, as it means client got bigger contract. Congratulations to the client.
GN New Product Line Explosion Proof Electrical Enclosures
GN established a brand new workshop for manufacturing Explosion Proof Electrical Enclosures.As an industry equipment manufacturer, GN design and make explosion proof electrical control equipment for GN Solids Control equipment, and also GN is able to custom design electrical control system for clients special requirements.
Ex EnclosureGN Explosion Proof Electrical Enclosures include but not limited to following:
- Exd Series Explosion Proof Electrical Control Panel
- Explosion Proof Motor Starters
- Explosion Proof Junction Box
- Ex Pressurized Control Panel for VFD and Soft Starters.
Whatever you need single motor starters, or complicated PLC and HIM automatically electrical control system, GN experienced engineer is able to design the control system to fit your needs.
As we can supply ATEX approval, IEC Ex Approval and CN Ex approval electrical control enclosures, so our electrical control equipment is available for hazardous area applications world widely.
Advantage of GN Explosion Proof Electrical Enclosure1)40,000 Square Meters manufacturing facility with Advanced CNC machineries.2) Worldwide explosion Proof Approvals for hazardous area applications.3) PLC, HMI design for automatically electrical control. 4) Worldwide distribution and service from GN branches and partners.5) Electrical Components are all Famous Brand like ABB, SIEMENS, Or Schneider.