|
Oct
22
|
GN design and manufacture Variable high speed decanter centrifuge for oilfield drilling fluids,and other decanting centrifuge for drilling mud separation.
high speed decanter centrifuge
1．General information Variable high speed decanter centrifuge
With the improvement of petroleum drilling technology and environmental protection awareness, higher requirements are put forward to the petroleum drilling solid-control system, mainly embodies in the following three aspects:
a) Oil gas exploration developer wish to use more clean mud drilling to protect the oil gas layer so as to achieve higher oil gas production.
b) The using of turbo screw drilling technology put forward higher requirements on the mud cleanness.
c) More attention will be paid to the disused mud treatment, while treat the disused mud is mainly to separate solid phase from liquid phase as much as possible.
Medium speed centrifuge can separate solid phase granule with the diameter of 5~7μm in low-viscosity mud, as to the thinner granule and high-viscosity drilling mud or the granule in oil based mud, it can not separate them well. So, medium speed centrifuge can hardly meet the new requirements of solid-control system, deploying high speed centrifuge is the development trend in future.
GN Variable high speed decanter centrifuge produced by our company can better meet the above requirements.
More From smartying
5 Pings to “Variable high speed decanter centrifuge”
3 Responses to “Variable high speed decanter centrifuge”
-
1. thesooply Says:
December 3rd, 2009 at 4:36 amDear Author http://www.gnsolidscontrol.com !
I can not take part now in discussion – it is very occupied. But I will soon necessarily write that I think. -
2. Margarita Troncoso Garcia Says:
December 8th, 2009 at 1:07 pmthe quote of high speed polishing centrifuge for drilling mud.
tanks
-
3. Mary Whitmyre Says:
October 25th, 2010 at 5:50 amWonderful writing! You own the talent of writing beautifully. I individually cherished the way it has been drafted especially the accurate flow of skilful thoughts.
April 17th, 2010 at 1:52 am
[...] solids control can manufacture middle speed, High Speed & Variable Speed decanter Centrifuge according to the customer’s [...]
April 26th, 2010 at 8:17 am
[...] important part for the decanting centrifuge. GN solids control produce middle speed centrifuge, high speed centrifuge and variable speed centrifuge, and our drum is 1Cr18Ni9Ti material made and Screw propeller SS304 [...]
June 11th, 2010 at 8:40 am
[...] solids control produce 3 models of high speed,middle speed, variable speed 2 phase centrifuges that separate solids from liquids. In all three [...]
August 9th, 2010 at 7:08 am
[...] Solids Control manufactures and markets a complete line of high-speed, variable-speed and fully variable-speed decanting centrifuges for handling drilling fluids. Ruggedly built for oilfield and industrial service, they are [...]
March 19th, 2011 at 3:15 am
[...] high speed decanter centrifuge 1 set or middle speed decanter centrifuge 1 set, depends on [...]