Recently, GN Solid Control has successfully finished a set of mini size sludge vacuum pump and mini size decanter centrifuge, they will be exported for a foreign customer. They will be used for a tank cleaning project.

The solids and sludge vacuum pump is a mini size with portable design, the model code is GNSP-10. The mini size vacuum pump is equipped with tires for easy movement. It will be used to transfer the waste slurry which is generated from tank cleaning works. And the decanter centrifuge model code is GNLW224. It is a 9 inch mini size bowl centrifuge with high speed for solid and liquid separation. GN Solids Control sludge vacuum pump and decanter centrifuge are widely used in China and outside China at various job sites. Clients are very happy with their performance.

GN Solids Control makes various sizes sludge vacuum pump for solids, sludge, powder or liquid transfer. It is a kind of vacuum pump that forms a vacuum in the tank through pneumatic, then sucks the materials, and then inflates the tank into positive pressure to discharge the materials from the tank. Because its working principle is pneumatic and no power supply is required, GN Solids Control vacuum pump can be used in explosion-proof areas and hazardous areas.

Due to the unique venturi device of GN Solids Control solid vacuum pump, it can produce a vacuum effect of 25 inches Hg (mercury column) under the condition of strong air flow, empty the air in the tank and then suck the materials, so there are almost no wear parts. It is suitable for the transportation of high-density materials and materials with solid content exceeding 80%, and its stable performance enables it to operate in the most difficult environment.

GN Solids Control 9 inch decanter centrifuge is a small bowl centrifuge, which are mainly used under the working conditions of small treatment or limited site, and are also ideal equipment for centrifuge experimental test. The mini side centrifuge is mainly used to treat the oily sludge extracted from the oil tank by the vacuum pump for solid-liquid separation. According to different customer needs, our company can also provide customers with three different control modes; Constant speed control, frequency conversion control and full hydraulic control. In addition to centrifuges, our company can also provide customers with professional chemical dosing devices, which can be used with centrifuges to obtain better solid-liquid separation effect.