For a longer lifetime and reliable performance, suitable and on time operation and maintenance on decanter unit is essential. Below instruction from work top cantrifuge manufacturer- GN Solids Control

high speed centrifuge bowl gn mud decanting centrifuge

Operation

A. All safety protection guards shall be installed before starting up. It is forbidden to open the guards of decanter centrifuge to observe the running state of the machines.

B. During the operation of the decanter centrifuge, touch to moving parts and rotation parts should be avoided.

C. It is forbidden to brake in any way before the decanter centrifuge is stopped.

D. If there is abnormal noise and vibration, close down decanter centrifuge immediately and make troubleshooting.

E. It is forbidden to have the decanter centrifuge running at the rotating speed out of active speed that indicated in the instruction and nameplate.

△Only after power is cut off can electrical devices be wired or plugged/unplugged!

Maintenance

A. Only after power is cut off and bowl stops completely running can the decanter centrifuge be dismantled and adjusted.

B. When opening the cover of collecting box, it should be opened sufficiently and be fixed to prevent the sudden closure of the cover and injure the operators.


ABOUT THE AUTHOR

admin