GN Solids Control is a mainly focusing on liquids and solids separation. GN Solids Control is capable to make waste water treatment system. GN Solids Control can make waste water treatment system to treat both oil slurry and non-oil slurry. The separation system for oil surry and non-oil slurry is not the same.
GNWTU-50A is a waste water treatment Unit specially design and made by GN Solids Control. The waste water treatment Unit is a special designed system for construction mud settlement, as well as for industrial waste water settlement. The maximum discharge rate of the GNWTU-50A waste water treatment Unit up to 50m3/h. It is a system designed to treat non-oil slurry.
GNWTU-50A waste water treatment Unit can be used for medium size sites such as civil engineering projects, or building project, like piling, and micro tunneling etc…
After the chemical dosing separation application, the suspended solids content can be below 50 mg/liter. In this case the treated water can be either discharged into the public drainage system or recycled for further use. The treated water can be reused of as drilling fluid, vehicular washing bays, recharge of wells, toilets, cube curing, ponding tests. This saves a lot of cost for water and protects the environment.
GNWTU-50B Wastewater Treatment Unit is a special designed system for oil water and solids separation system. Maximum discharge rate of GNWTU-50B Wastewater Treatment Unit can up to 50m3/h. GNWTU-50B Wastewater Treatment Unit is designed for industry waste water with suspended solids and free oil.
The chemically enhanced separation reduces the suspended solids content below 50 mg/liter and free oil to be below 10 mg/liter.
In this case the treated water can be either discharged into the public drainage system or recycled for further use. The treated water can be reused as drilling fluid, vehicular washing bays, recharge of wells, toilets, cube curing, ponding tests or industrial applications.
This saves a lot of cost for water and protect the environment.