In past couple years, GN Solids Control is keeping research and development the new products so that clients could get a turnkey solution for drilling mud solids control and waste management. With the gradually issuing of the new environmental regulations, the drilling operators focus their eye on the final solution of disposal on the drilling waste.
Solidification unit is a new developed product of GN for the final treatment of drilling waste including drilling cuttings, oil bottom sludge and so on. It is not firstly designed and manufactured by GN; some other world famous waste management equipment supplier already made and sent if for onsite application. As a leading manufacturer of waste management equipment in China, no doubt, GN will develop this type of equipment.
So far, GN’s solidification unit already been sent to customer’s site for application and the feedback was good. GN’s solidification unit has 2 chemical storage tanks where the operator could put the cement and lime in it. By adjusting the feeding rate, the chemicals and waste would be fed to the mixing vessel. Here the waste would become inactive material that will not pollute the soil and water. Furthermore, the discharges can be used to pave the road for site.
Customer firstly fed wet waste into this unit and the treatment result is not as good as expected. Later, GN’s engineer told them this solidification unit is used to treat the waste what firstly should be treated by the dryer unit. Like the drilling cuttings could be treated much dryer by the high G force drying shaker and vertical cuttings dryer unit.
GN is also thankful for the good suggestions from customer on perfect the design of this unit. And GN did upgrade the design and make it more compact for site layout and transportation. For some points request good sealing, GN also took into consideration. Any interest on GN’s solidification unit, please feel free to contact with us for more information.