Recently GN Solids Control exported a oil drilling rig mud system for a 1500hp oil rig in Russia, with our partner supplying the mud tanks. GN supplying all the main equipment like shale shaker, mud cleaner, decanter centrifuges, centrifugal pumps.
A normal 1500HP oil drilling rig developed with a 350 t hook load capacity for medium deep wells. Every aspect of rig operation from mobility and deployment to machine and structural design has benefited from a wide array of improvements that maximize safety while minimizing the time for rig-up/down and transport. An integrated hydraulic system is connected to raise the mast and the substructure. When the substructure is in the lowered position, the mast is connected to the drill floor. The mast is raised by two hydraulic cylinders. When the mast is in the vertical position then the hydraulic cylinders are disconnected and retracted. Two telescoping cylinders now lift the substructure into operational height.
The normal mud system (4 mud tanks system 1600bbls) mainly including
DITCH MAGNETS
MUD TANKS: SHAKER TANK (1) ea. 40 L x 8’ W x 8’ High 400 BBL with porch
INTERMEDIATE TANKS: (1) ea.‐40’L x 8’ High x 8’ wide 400 BBL with porch
SUCTION TANK: (1) ea.40 L‐x 8’ft W’ x 8’ High, 400 BBL with porch
RESERVE TANK (1) ea.40 L‐x 8’ft W’ x 8’ High, 400 BBL with porch
TRIP TANKS (1) 80 BBL Capacity With 3”x 4”transfer Pump X 20 hp.
PILL TANK: (1) 80 BBL Capacity
Slug Pit
1) 4 sets of shale shaker, GNZS594E-HB.
This shale shaker is 4 panel shakers with big treating capacity,
2) DESANDER‐DESILTER (1) With 16 x 4” De‐silter Cones and (3) 10”in cone De‐sand 6 x 8 centrifugal pump (2) ea 100 hp. motors
3) 2 sets of decanter centrifuge, GNLW363CG
The centrifuge is high speed centrifuge can reach 3200RPM, and G force 2062@3200RPM.
4) 20 sets of centrifugal pump
Freely contact with GN Solids Control for a total solution.