Drilling mud Equipment

Filter press know as an equipment in environment protection, (Filter Press wiki), it is a separated system. Referring to mud cleaning system or mud recycling system for dealing with drilling waste of construction, or HDD,or alike. “We need clean water.” So a filter press seems better.

As one client told us: We have the mud pit, so not like your system working continuously. It is a big one, and do not working with other equipment as systems, no logical connections. It can handle big particles, but if the particle smaller, it is better.

We need a highly efficient, compact, plate & frame filter press dewatering filter press device for separating solids from liquid slurries in the form of compressed cake. Its major components are a structured framework, plate and frame dewatering filter press system and filter cloth (shown with optional sludge carts).

If you have any more questions, Here is a list of questions about our filter presses that we commonly receive.

To solve the customers problem, we supply one updated GNZS8752 shale shaker, one GNZJ852 mud cleaner, and one jet mud mixing equipment. After the desander, it is the filter press, one plate & frame filter press.

After coming back from exhibition from Brazil, Russia, GN now is going to attend the exhibition in Argentina. We also are considering to attend Mining Conference in Mongolia on 8-9 September, 2011.

Water Well Drilling Mud System for SALE!

We are going to take one complete water well drilling mud system, so drilling contractors, or end users can understand more about our products. The one who buy the mud system for showing will get a special discount, free transportation, or other conditions for discussion.

GN Solids Control have exported to Mongolian several water drilling mud systems, we have cooperate very well with schramm drilling rig company, they are very happy with our mud systems.

Major Drilling in Mongolia also bought one mud system from us. It is working very well, this is the feedback.

It is a good chance to try our products, and then if you buy again, you will know, GN Solids Control always supplying high quality products, for exhibition or not, it will also a better exhibition in your working site.

“FAST MOVING” is becoming a more and more important factors for drilling system, especially for small and compact ones. Then rigs, mud pumps, and mud systems, all putted onto a trailer.

When we put our system in CIPPE 2011, we just put the mud system on the trailer, for fast moving, and keep it compact. Then the clients are very excited to say, wow, GN Solids Control is going to supply fast moving mud system.

Yes, we are! But we are designing and testing them, it needs some time to say “hello, world”. As people know, we insist our own design, and produce systems for our clients with high quality. Keep tune, you will get the exciting news.

Now we have produced 2 mud system, with hydraulic jet legs, for an Australian client.

While happy to see that, other clients are also very interested in this.

At the same time, a really fast moving mud system, which is mounted on a trailer, as we have known from other foreign mud system. And one customer are going to buy the first set.

Trip tank is part of whole drilling mud system, usually a small metal tank with small capacity about 20-40 bbls with 1 bbl divisions inside and it is used to monitor the well. The trip tank is utilized to determine well condition in order to see if the well is still under static condition.

How the trip tank work?

While Tripping Out of Hole (TOH), a trip tank pump will circulate mud into a bell nipple in order to keep the hole full all the time and the over-flow mud will return back to the trip tank. Once every stand is pulled, the mud volume in the well will decrease because the drill pipe is pulled out of hole. Since the trip tank pump is always run while tripping, the annulus will be full all the time.

Trip tank manufacturer in China:

Beside is the ZJ70 drilling mud system, manufactured by GN Solids Control, the client is a famous Indian company, they repeat 3 orders for whole system.

GN Solids Control can supply the whole drilling mud system, trip tank included.

For the whole trip tank, it usually contains one mud agitator, one or two centrifugal pump, and GN Solids Control supply high quality products.

In the end of May, we exported a gas bustor to Pakistan, the Poland company’s office repeat an order for gas bustor. This time they also need a elevating gas bustor to satisfy various comoplicate site conditon, more flexible.

A simple separator vessel used to remove free or entrained gas from fluids circulated in the wellbore, such as mud used during drilling operations. The gas buster typically comprises a vessel containing a series of baffles with a liquid exit on the bottom and a gas-vent line at the top of the vessel. It captures and separate large volume of free gas within the drilling fluid. If there is a “KICK” situation, this vessel separates the mud and the gas by allowing it to flow over baffle plates. The gas then is forced to flow through a line and vent it to a flare. A “KICK” situation happens when the annular hydrostatic pressure in a drilling well temporarily (and usually relatively suddenly) becomes less than the formation, or pore, pressure in a permeable section downhole, and before control of the situation is lost. It is always safe to design the mud/gas separator that will handle the maximum possible gas flow that can occur.

High Quality Gas Bustor Supplier

GN Solids Control supply high quality gas bustor all over the world. As an API & ISO certified company, GN Solids Control always choose top quality material, Yuanda valve, Seismic pressure gauge.

Shale shaker is important for offshore drilling mud management, offshore waste management, and not same as onshore shakers, it has higher requirements. GN Solids Control can supply both elliptical and linear motion shale shaker for offshore project.

Shale shakers are essentially vibrating sieves that remove drill cuttings. The basic designs feature large wire cloth screens that shake or vibrate drill cuttings off the screens as the fluid flows back into the mud system and down the well bore. The challenge for drilling crews is to run the screens as finely as possible while still maintaining an efficient flow rate. It’s a difficult but important balancing act, since controlling solids in the drilling fluid is crucial for controlling costs.

GN Solids Control totally understand this, and emphasize the application, focus the user friendly. So GN always choose the top quality material from all over the world.

For offshore project, we use marine explosion proof motor, (Explosion proof rate dⅡBT4), shaker surface is coated with heavy anticorrosive paint.

Excited to broadcast that now we are going to export 2 mud system to America, and Halliburton buy products from us. So if you are interested in our shaker for offshore project, contact GN now.

Solids control equipment are widely used in mining industry for mining dewatering. In about last year, we give a solution for slime dewatering in mining. Here is the Q&A of Slime Dewatering System.

For a good solution, usually we need to know:

1) The particles, it is better if we can have a curve to show how many bigger ones, how many smaller ones.

2) What are you aim to, get the clean water for environment friendly, want some of the particles for economy purpose?

3) Sometimes density and viscosity of the drilling fluid is needed.

As shown in the picture, we choose our GNZS83-2 two panel linear motion shale shaker, ZQJ100s with PU hydrocyclones. Then we can get mixed water with particles less than 15 microns. Then if still need cleaner water, we can add decanter centrifuge.

Thi is a system for hydromining to Turkey, we also customized kinds of system as required.

 

When referring to offshore drilling fluids management, usually remind us STEP OFFSHORE, which belongs to AKER SOLUTION, a very famous company. But they are not manufacturer.

In 2010, STEP Offshore appointed exclusive distributor for Derrick. STEP Offshore given exclusive right to sell premium solids control equipment and screens in Europe. Logistics infrastructure in place to satisfy the most demanding customer requirements. Pyramid Plus screen technology gives up to 200 percent more screen area.

For the offshore drilling fluids management, Derrick supply these main products: Dual Pool 600 shale shaker, Dual Pool 600 mud

 

cleaner, FLC 513, FLC 514, FLC 503, FLC 504, DE-CP Premium 250 Centrifugal Pumps, DE-7200 VFD Centrifuge, DE-1000 Series Centrifuges, similar as onshore drilling while suit for offshore environment.

GN Solids Control can supply similar products for offshore application. Choose the proper motors, marine explosion proof, concern more on the painting, also the control panels, and so on.

BEM703 shale shaker, which is balanced elliptical motion, is designed by Mr. Zhang in Southwest Petroleum University  in 2009, and trialed in 2011 in one Chinese oilfield. Then we take it to the CIPPE 2011, this means it has been lead into the international market.

And it is very exciting that it is the highlight of all solids control equipment in the exhibition, we signed 2 contracts for similar system just in the booth.

For treating the oil drilling fluids, the balanced elliptical motion shaker is 20%-30% bigger than linear motion shaker, discharging speed is 10%-20% faster;For resisting the “screen stuck”, “screen paste” “horseshoe effect” ,the balanced elliptical motion shale shaker is much more effective.

Here is a simple list of drilling equipment suppliers in Malaysia. While GN Solids Control only supply solids control equipment and solids control system to Malaysia. A lot of companies in Malaysia now know GN Solids Control.

Korekan Instantflow Sdn Bhd

Address：Taman Segar, No. 53 Jalan Manis 3, 56100, Kuala Lumpur

Imextco (M) Sdn Bhd

Address: 67-3 Kepong Entrepreneurs Park, Jalan Metro Perdana Barat 1, 52100, kuala lumpur

 

Ming Say Marketing Sdn Bhd

Address: 46 Jalan Emas Sd 5/1A Sri Damansara Kepong 57100 Kuala Lumpur

 

JAKARANDA SDN BHD

Address: Menara MBF No. 22Suite 15.03, 15th Floor, Jalan Sultan Ismail, 050250
Drilco Technologies (M) Sdn BhdNo. 33-1 Jalan 2/115C, Taman Kuchai Jaya, 58200, Kuala Lumpur

 

Federal Drillers Sdn Bhd

Address: 4th floor, 1 jalan Ampang, 50450, Kuala Lumpur

Continue reading “Drilling Equipment Supplier in Malaysia”