Tel:+86-18701560173    E-mail: info@gnsolidscontrol.com

  • You are here:
  • Home

news

News

GN NEWS

More>>
 

GN Videos

Application Industry

Oil & Gas Industry

Waste Oil & Water Treatment

Chemical & Mining Industry

Food and Beverage Industry

Latest Products

  • SolidSolids Removal Unit for Core Drilling

    The GN Compact Solids Removal Unit (SRU) is employed in the solids control of drilling fluids for small mining rigs engaged in diamond drilling. Instead of relying on conventional drilling sumps, the GN Solids Removal Unit, also known as the GN Compact SRU, serves as the preferred choice for drilling fluids solids control in the diamond drilling sector.

  • Liquid Mud Plant

    GN Solids Control design and manufacture different size of liquid mud plant according to your need. We can design and build both vertical tanks, rectangular tank ,round tanks etc. depends on your space and requirements

  • Dredge Slurry Dewatering System

    Dredge Slurry dewatering system is dredge slurry separation system consist of shale shaker, desander, desilter or decanter centrifuge for 3 to 6 stage separation depending on the needs.

  • TBM Slurry Separation Plant

    An efficient TBM slurry separation plant is the basis for the successful use of slurry-supported tunnel boring machines(TBM). The GN Slurry separation plant is popular for project of AVN Machines , Mix shields  or Shaft Sinking Machines . GN Solids Control utilize our shale shakers, desander desilter, as well as decanter centrifuges to processes separate and remove the excavated solids from the bentonite suspension – a mixture of water and thixotropic clay. The cleaned fluid is then transferred back to the slurry circulation.

  • 9 Inch (220) Decanter Centrifuge – Mini Centrifuge

    The 9 Inch Decanter Centrifuge is a Mini centrifuge with small size for industrial application. The bowl of the centrifuge is 9 inch (220mm). As the compact design, it’s popular for client to use it in small capacity or limited space application for solids and liquid separation

  • 14 Inch (360) Decanter Centrifuge – High Speed Centrifuge

    The GN 14 inch (360mm) diameter bowl decanter centrifuge which has a length over diameter ratio of 3.5:1 with high speed up to 4000 RPM. The centrifugally casted duplex stainless steel bowl and the tungsten carbide hardened tiles on the solids conveyor maximize the GNLW363 centrifuges operational service life between overhauls.

  • 18 Inch (450) Decanter Centrifuge – High Performance Centrifuge

    The GN 18 inch (450mm) diameter bowl decanter centrifuge which has a length over diameter ratio of 3.4:1 or 4:1 for removal of low gravity solids from the liquid at reduced operating costs. The centrifuge is fitted with a 75 hp main drive and a 30 hp back-drive at one end.

  • 22 Inch (550) Decanter Centrifuge – High Capacity Centrifuge

    The GN 22 inch (550mm) bowl diameter decanter centrifuge is a high capacity centrifuge. GN 22inch centrifuge is optional in bowl length and diameter ration of 3.3:1 or 4.2:1. This Fully Variable Speed VFD controlled unit is built using the most reliable and robust electrical components

  • 30 Inch (760) Decanter Centrifuge – Big Bowl Centrifuge

    The GN 30 inch (760mm) bowl diameter decanter centrifuge is a big bowl centrifuge. GN 30inch centrifuge is with bowl length and diameter ration of 4.2:1. This bowl size allows client to handle big volume fluids with one single unit.

  • 3 Phase Decanter Centrifuge

    GN 3 phase decanter centrifuge is used to separate two liquid phases from one solid phase at the same time. As is known, decant centrifuge principle of separation is by G force. Because of the different densities of the (immiscible) liquids and the solid , so all three phases can be discharged simultaneously using the GN 3 Phase decanter centrifuge. GN Solids Control design and manufacture three phase decanter in different bowl size include: 360mm, 450mm and 550mm.

gn logo

GN Solids Control is one of the most famous International Brand for Mud Solids Control System & Drilling Waste Management. GN have the one stop for Solids Control Solution of your oil gas drilling....ReadMore

Information

Contact Us

  • No.1799, Huxing West Road,Yutian Industrial Zone,Tangshan,China 064100
  • +86-316-5276988 
  • info@gnsolidscontrol.com
  • +86-187-01560173 (China· Time)
    +1-713-377-2984 (USA Time)
Copyright 2009 - 2025 GN Solids Control. All rights reserved.