September 28 2013

GN Screw Conveyor

GN Screw Conveyor is popular in the oil gas industry for transfer the drilling cuttings to feed to the cuttings dryer,and cuttings colletction box.GN designed 3 size of diamter, 12inch, 14inch,18inch, each size has 4 different length for option according to the drilling site of the customer.


 GN Screw Conveyor (Auger) Technical Parameters

ModelScrew Diameter (Inch)Screw Length(Ft)Capacity(Ton/Hour)Motor(Kw)Speed (Rpm)Weight(Kg)Dimension: L×W×H(mm)
GNSC12A-24 12 24 20 5.5(7.5HP) 60 1426 9150×450×600
GNSC12A-36 12 36 20 7.5(10HP) 1855 12950×450×600
GNSC12A-48 12 48 20 11(15HP) 2318 16750×450×600
GNSC14A-24 14 24 30 7.5(10HP) 1515 9200×485×650
GNSC14A-36 14 36 30 11(15HP) 2028 13000×485×650
GNSC14A-48 14 48 30 15(20HP) 2549 16800×485×650
GNSC16A-24 16 24 45 11(15HP) 1668 9200×545×680
GNSC16A-36 16 36 45 15(20HP) 2269 13050×545×680
GNSC16A-48 16 48 45 18.5(25HP) 3344 16950×545×680
Remark:  Capacity is for horizontal layout at 60RPM
Note: Electrica specs for 380V/50Hz, 460V/60Hz or Customized
           Screw material wear-resisting 16Mn
           Each section standard length and interchangable

GN Screw Conveyor Features & Benefits 

GN Solids utilize a custom designed and constructed Screw Conveyor (Auger) as part of drilling waste management system.The Auger is designed with 12 feet per section which makes it to be standard spare parts for exchange with each other.The screw material utilized by GN is abrasive material which lasts longer than our competitors. The Screw Conveyor(Auger) is designed to offer an efficient, low cost, cuttings transport system for offshore and onshore drilling installations. The screw conveyor are manufactured to the highest safety standards and are fitted with protective grating or cover to prevent foreign bodies entering the conveyor system, and to of fer enhanced safety for all personnel.

Besides the Screw Conveyor, GN Solids Control also have the cuttings transfer pump for the movemet of the drilling cuttings.



GN Videos

Latest Products

  • Solids Removal Unit for Mining Industry

    The GN Compact Solids Removal Unit (SRU) is employed in the solids control of drilling fluids for small mining rigs engaged in diamond drilling. Instead of relying on conventional drilling sumps, the GN Solids Removal Unit, also known as the GN Compact SRU, serves as the preferred choice for drilling fluids solids control in the diamond drilling sector.

  • Liquid Mud Plant

    GN Solids Control design and manufacture different size of liquid mud plant according to your need. We can design and build both vertical tanks, rectangular tank ,round tanks etc. depends on your space and requirements

  • Dredge Slurry Dewatering System

    Dredge Slurry dewatering system is dredge slurry separation system consist of shale shaker, desander, desilter or decanter centrifuge for 3 to 6 stage separation depending on the needs.

  • TBM Slurry Separation Plant

    An efficient TBM slurry separation plant is the basis for the successful use of slurry-supported tunnel boring machines(TBM). The GN Slurry separation plant is popular for project of AVN Machines , Mix shields  or Shaft Sinking Machines . GN Solids Control utilize our shale shakers, desander desilter, as well as decanter centrifuges to processes separate and remove the excavated solids from the bentonite suspension – a mixture of water and thixotropic clay. The cleaned fluid is then transferred back to the slurry circulation.

  • 9 Inch (220) Decanter Centrifuge – Mini Centrifuge

    The 9 Inch Decanter Centrifuge is a Mini centrifuge with small size for industrial application. The bowl of the centrifuge is 9 inch (220mm). As the compact design, it’s popular for client to use it in small capacity or limited space application for solids and liquid separation

  • 14 Inch (360) Decanter Centrifuge – High Speed Centrifuge

    The GN 14 inch (360mm) diameter bowl decanter centrifuge which has a length over diameter ratio of 3.5:1 with high speed up to 4000 RPM. The centrifugally casted duplex stainless steel bowl and the tungsten carbide hardened tiles on the solids conveyor maximize the GNLW363 centrifuges operational service life between overhauls.

  • 18 Inch (450) Decanter Centrifuge – High Performance Centrifuge

    The GN 18 inch (450mm) diameter bowl decanter centrifuge which has a length over diameter ratio of 3.4:1 or 4:1 for removal of low gravity solids from the liquid at reduced operating costs. The centrifuge is fitted with a 75 hp main drive and a 30 hp back-drive at one end.

  • 22 Inch (550) Decanter Centrifuge – High Capacity Centrifuge

    The GN 22 inch (550mm) bowl diameter decanter centrifuge is a high capacity centrifuge. GN 22inch centrifuge is optional in bowl length and diameter ration of 3.3:1 or 4.2:1. This Fully Variable Speed VFD controlled unit is built using the most reliable and robust electrical components

  • 30 Inch (760) Decanter Centrifuge – Big Bowl Centrifuge

    The GN 30 inch (760mm) bowl diameter decanter centrifuge is a big bowl centrifuge. GN 30inch centrifuge is with bowl length and diameter ration of 4.2:1. This bowl size allows client to handle big volume fluids with one single unit.

  • 3 Phase Decanter Centrifuge

    GN 3 phase decanter centrifuge is used to separate two liquid phases from one solid phase at the same time. As is known, decant centrifuge principle of separation is by G force. Because of the different densities of the (immiscible) liquids and the solid , so all three phases can be discharged simultaneously using the GN 3 Phase decanter centrifuge. GN Solids Control design and manufacture three phase decanter in different bowl size include: 360mm, 450mm and 550mm.