November 26 2019

Recently, GN attended the Ecomondo Green Technology Expo in Rimini Italy and showed the separation and conveying equipment there. Many visitors came to GN booth and showed interest to GN Corporation and the products. 

GN booth was located in the Hall D2 and No. 010, GN brought the widely used decanter centrifuge and sludge vacuum pump. From the TV set, visitors can learn more about the working principle and performance of GN equipment. 

GN GNLW series decanter centrifuge is ranging from 9 inch to 30 inch of the bowl diameter, with the L/D ration 4.2, which is ideal design for waste water treatment. Bigger L/D ration can keep the slurry inside the bowl for longer time. In adoption of the material, GN chooses the duplex stainless steel 2304 with centrifugal casting technics to make the bowl much denser and even distribution. For protection and long operation time, GN use the tungsten carbide plate bolted and welded on the screw propeller, even the slurry distribution port and solids discharge port are protected by tungsten carbide bushing. GN decanter centrifuge can widely be used in waste water treatment, edible oil production, chemical industry and other industrial application.

GN sludge vacuum pump is 100% pneumatic driven which makes it applicable in the area with flammable gas. The pump can be applied for transferring of liquid, slurry, wet sludge and even solid powder and gravel. The pump is also automatic operation, operator only needs to adjust the suction and discharge time by twisting the timers on the panel. As there is no any moving part inside the cavity, maintenance is very easy. According to different application, GN can make the pump with carbon steel or stainless steel as the material touching part. 

GN has got several potential businesses at the Ecomondo. For more information on GN equipment, please feel free to contact.