Aug 16

GN Solids Control is the 1st one manufacturer in China who ever sent the drilling cuttings solidification unit to client’s jobsite. It was predictable that many comments regarding the performance of GN solidification unit would come back. More important is how to response to these comments.
GN is always keeping developing new products, which is the reason of the first unit drilling cutting solidification unit coming from GN. Some of the comments on GN solidification unit are positive, while some are very good suggestions for GN to perfect the design. The unit sent to site was designed whole assembly installed on one skid, which makes the unit too long to move and locate the unit easily. The new design divides the machine into 2 parts; one is for solidification agent storage, the other part is for mixing. These 2 parts could be located more freely according to the site space. Comparing with old model, the new one has larger tank for agent storage, on top of the tank, hand rails are installed. The agent bag pallet could be put on top of the tank, which greatly increases the working efficiency. Though 2 parts, the whole system still could be put into one 40ft container for oversea transportation.

GN-drill-cutting-Solidification-unit

Cuttings Solidification Unit

The drilling cutting discharged out of the shale shaker and decanter centrifuge could be fed into the solidification unit for treatment. However, there is a misunderstanding on the performance of the solidification unit: No matter how wet the cutting is, so long it is fed into the solidification unit; the dry material will come out. This is not correct. The much wet the cutting is, the more solidification agent will be used. Hence, the operator should make the cutting as dry as possible before feeding into the solidification unit.
GN’s solidification unit was proved greatly saved the man power on site as it can working continuously, the speed could also be adjusted as per the working condition. Solidification unit is one of the final solutions for water base drilling cuttings. Easy operation and maintenance are its advantages.

written by admin \\ tags: , , , ,

May 27

In past couple years, GN Solids Control is keeping research and development the new products so that clients could get a turnkey solution for drilling mud solids control and waste management. With the gradually issuing of the new environmental regulations, the drilling operators focus their eye on the final solution of disposal on the drilling waste.

gn solidification unit onsite (2)

GN Solidification Unit Onsite

Solidification unit is a new developed product of GN for the final treatment of drilling waste including drilling cuttings, oil bottom sludge and so on. It is not firstly designed and manufactured by GN; some other world famous waste management equipment supplier already made and sent if for onsite application. As a leading manufacturer of waste management equipment in China, no doubt, GN will develop this type of equipment.
So far, GN’s solidification unit already been sent to customer’s site for application and the feedback was good. GN’s solidification unit has 2 chemical storage tanks where the operator could put the cement and lime in it. By adjusting the feeding rate, the chemicals and waste would be fed to the mixing vessel. Here the waste would become inactive material that will not pollute the soil and water. Furthermore, the discharges can be used to pave the road for site.

gn solidification unit onsite (1)

Processing Result

Customer firstly fed wet waste into this unit and the treatment result is not as good as expected. Later, GN’s engineer told them this solidification unit is used to treat the waste what firstly should be treated by the dryer unit. Like the drilling cuttings could be treated much dryer by the high G force drying shaker and vertical cuttings dryer unit.
GN is also thankful for the good suggestions from customer on perfect the design of this unit. And GN did upgrade the design and make it more compact for site layout and transportation. For some points request good sealing, GN also took into consideration. Any interest on GN’s solidification unit, please feel free to contact with us for more information.

written by admin \\ tags: , , ,