Feb 10

Vertical rotating drilling rig is the normal machine used in piling project. During the drilling process, in order to protect the inner wall of the drilling hole and speed up the process, the operator always chooses to use drilling mud. Then here comes another problem how to reduce cost of the drilling mud thereby to reduce the cost of drilling. The solution is to use mud recycling system to make the drilling mud reusable.
The purpose of the mud recycling system is to remove the large size solid particles in the drilling mud by several separation machines. In regards to the mud recycling system for piling project, it could be a very compact design as separation process is not so complex as that for oil gas drilling. GN solids control is one of the most experienced separation solution providers who could provide the mud recycling system for almost all the industries will use it. GN already developed the standard mud recycling system especially for the piling project.

gn-de-sanding-unit-piling

De-sanding Unit

Strictly speaking, the mud recycling system used in piling should be called de-sanding unit as the drilling depth is normally shallow and most of the solid particles are sand. A de-sanding unit would be enough for processing the separation to get the expected reusable drilling mud.
GN’s de-sanding unit is a compact structure 2 steps separation system. The main equipment in this de-sanding
unit is combined with a 2 layers shaker and cyclone manifold. The double layers shaker is used for coarse solids separation by the under layers and the upper layer screen is for drying the slurry discharged from the cyclone unit. The tank under the shaker unit is used to store the drilling mud. One centrifugal pump is installed in the system for transferring the mud to the cyclone unit for sand separation.
This de-sanding unit could be connected with extra mud tank for larger capacity mud storage. The operators can also equip a jet mixing unit to make an self-contained mud recycling system for other drilling project like HDD and water drilling.

written by admin \\ tags: , , , ,

Nov 06

The business of today’s GN has been divided mainly into 2 scopes, one is the normal drilling mud recycling, and the other is the waste management including the waste coming from petroleum related and other separation industries. This blog is mainly talking on the drilling mud recycling system that used in non oil drilling industry.
In oil drilling, the drilling depth and safety regulation request large drilling mud storage and more solids control equipment. Thus, the mud recycling system is always equipped with degasser unit and large volume mud tanks.

hdd-mud-recycling-system

HDD Mud Recycling System

Comparing with the mud recycling for oil industry, the unit for non oil drilling is more compact and less equipment needed.

  • Trenchless/No Dig HDD project – The mud recycling system used in this type drilling is matching with a No dig rig. In some project for long distance pipeline and cables laying underground, it is inconvenient to dig an open groove on the ground as that will interrupt the normal traffic. The trenchless is an ideal choice. The mud recycling system for this project is always consisting of 3 stages separation as shale shaker unit, de-sanding and de-silting cyclone.
  • Piling is the main method to install the bridge supporting pillar. A de-sanding unit with a small tank would be enough to remove out the coarse solids from the drilling fluids. The de-sanding unit is a composition of de-sander cyclone and shaker unit that can separate out the solids with size of 40-70 microns. Piling does not request very clean mud; less equipment involved makes the recycling unit for piling is very compact.
  • GN also can manufacture the mud recycling system for tunneling project. For micron tunneling, GN has model available with capacity of 120m3/h, 240m3/h and 500m3/h. For large flow rate request, GN has the mud plant GNMS -3600M with treating capacity of 3600m3/H.
tbm-slurry-separation-plant

Tunneling Mud De-sanding Plant

Besides, GN’s mud recycling system can also be used in water well drilling, coal bed methane exploration, dredge slurry separation and the mining flushing waster cleaning process.

written by admin \\ tags: , , , , , , ,