GN Solids Control designed mud recycling system with desander for the Civil Engineering of Foundation Bored Pile machine. After recycling and cleaning the bentonite of you bored pile project, it saves you cost of mixing more bentonite as well as saves more cost for the disposal of the bentonite.
General Specifaction of GND-120 Bentonite Mud Rycling unit for Pile Foundation.
Handling Capacity: 120 m³/h
Total Power require:38.5Kw
GN Also have the 60 m³/h, 240 m³/h size avaible for your foundation bord pile bentonite mu reycling.
GN Desander for Pile Bentonite mud Recycling including
- Model:GNZS703-1S Desander Bottom Deck Screen Area: 2.6㎡ Recommended screen:0.30-0.50mm.Top Deck Screen Area:2.0 ㎡ Recommended screen 100-120 mesh.
- Desander: 1 each 10 inch desander for separation up to 50 microns solids.
- Vibration Motors: 2×1.72Kw Italy Oli Brand Motors.
- The Shaker Deck screen support is Stainless Steel
Slurry Pump Specification
Model:GNZS6x5-12J Pump inlet:6inch Outlet: 5inch, Motor Size: 37Kw Capacity: 150m³ Lift:30m
Working procedure of Pile Bentonite recycling Desander
1） A pit slurry pump suck fluids from the foundation slurry pit and feed to the GNZS703D-1S Desander Bottom Shaker.
2） The first phase cleaning is processed by the bottom shaker deck of GNZS703D Shaker, and the cleaning fluids drops down to the mud tank.The solids up to 0.5mm will be separated out.
3） A GNSB6x5-12J Slurry pump suck Bentonite fluids from the mud tank, and feed to the ten inch desander cyclone, and solids drops down to the up deck shaker for drying, and the clean fluids goes to the second compartment of the mud tank.The solids up to 50 microns will be separated out.
4） The outlet of the second compartment of the mud tank is clean fluids can go to clean fluids pit for reuse for your foundation pile project.