NEWS

December 13 2018

GN Solids Control is one of one top class manufacturers providing the solution for drilling mud recycling and waste management. GN's products are not only used for land rig, but also applied in offshore project.

The drying shaker unit is one of the main equipment in waste cuttings management system. It is used for further treatment of the drilling cuttings discharged out from primary solid control shale shaker. Comparing with the normal shale shaker, drying shaker has a large vibrating G force that makes the shaker recover more drilling fluids from cuttings. By using the drying shaker, the drilling fluids recovery efficiency would be highly increased and less waste discharged. To prevent the drilling fluids spraying out of the shaker deck and contaminating the area nearby, the drying shaker deck is designed to be cover with steel plate on top.
To increase the drilling mud recovery efficiency, GN published the VIST vacuum shaker screen system that can be used especially in offshore project.

GN'smud cleaner is a 3 in 1 equipment including bottom drying shaker, desander cyclone and desilter cyclone. Features of GN mud cleaner
1. Bottom shaker is always same model with the primary shale shaker in same solids control system.
2. Hydro cyclone unit are 100% PU material for better wear-resistance performance.
3. Cyclone manifold pipe frame is removable for easy transportation.
4. Installation of composite frame shaker screen for longer working time and large screen area.

Mud cleaner can remove the cuttings with size large than 20 microns in the drilling mud. Before feeding the mud into the decanter centrifuge, better to use a mud cleaner to treat the mud firstly as it can greatly reduce the solids content so that to reduce working load of the decanter.

GN Solids Control is open to communicate with clients in technics improvement and customized design. For more information, please feel free to contact with GN.